Drinking Water Quality Table
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1 | Only the most recent samples with detected regulated contaminants found in the water are listed. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | The lowest to highest detected contaminant levels from any well or sample are reported. ND means None Detected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3 | Only Wells #7 was sampled. Well #4, 6 , and 8 were not required to be sampled. The Washington State Department of Health has reduced monitoring requirements for inorganic chemicals because the source is not at risk of contamination. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4 | Iron and manganese are secondary contaminants due to aesthetic water quality and are not a health issue. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5 | The highest detection reported is the 90th percentile sample. 30 samples analyzed, with 1 sample
above the AL. This does not trigger treatment, more sampling, or other requirements. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Key: |
|
AL |
= Action Level, the concentration of a contaminant which, if exceeded, triggers treatment or other requirements that a water system must follow. |
MCL |
= Maximum Contaminant Level |
MCLG |
= Maximum Contaminant Level Goal |
MRDL |
= Maximum Residual Disinfectant Level |
MRDLG |
= Maximum Residual Disinfectant Level Goal |
pCi/L |
= picocuries per liter |
ppb |
= parts per billion, or micrograms per liter (ug/L) |